Using the Mouse on a Hardware Terminal
Jump to navigation
Jump to search
Certain IBM Terminals in the InfoWindow II line of products have an additional port where one can attach a PS/2 mouse. Information about using the Mouse on a Hardware Terminal is scarce and not too easy to find.[1]
Two basic functions are available, and described in more detail on PDF page 13 of the below mentioned PDF document.
Copy-Paste
Two types are available:
- For copying a line, press and hold the shift key, press and hold the left mouse button and select the desired text by dragging. Releasing both shift and the mouse button copies the marked characters into a local buffer.
- For copying a block, press and hold the shift key, do a double-click with the left mouse button, but do not release the button at the second click.[2] Instead drag the mouse to mark the desired screen area. Releasing both shift and the mouse button copies the marked characters into a local buffer.
Pasting is done at the cursor position by Shift + right click.
This function allows copy-paste not only working within one terminal session, but also between multiple ones.[3]
Simple Hotspots
These provide alternate ways of interacting with the system.
- Double-click with the left key is the same as pressing
Enter. - Subfiles can be scrolled downwards by left-clicking on the
More…indicator at the bottom right of a subfile, and upwards by right-clicking there. - The description of command keys — usually found at the bottom of a screen — is automatically converted to hotspots which can be left-clicked instead of pressing the respective function key.
- Appropriately written applications might utilize a menu bar, and pulldown menus which can be used like with a GUI through left-clicking them.[4]
See also
- G326-0265-10, IBM InfoWindow II 3486, 3488, 3489 Marketing Reference Guide
Footnotes
- ↑ Who would search a Marketing Manual for information usually being written in a User's Manual?
- ↑ I wonder what type of engineer comes up with such a cumbersome idea!
- ↑ There are two types of multiple sessions. One is provided by the operating system in the host, and they can be switched by pressing the attention key and choosing the appropriate menu item. Default number of sessions is two. The inactive session is suspended and not given CPU time. The other is provided by the terminal and might take additional addresses on the daisy-chained twinax line. The number of sessions is dependent on the terminal's capabilities and configuration. Some terminals allow sessions to be concurrently visible and active on the display.
- ↑ I've not yet seen such an application in the wild. I refuse to utilize this technique in my applications because for plain keyboard users, a menu bar is more cumbersome to use than pressing a simple function key. Also, they look good only on a terminal (emulator) supporting the enhanced interface.