Tape Drives on old AS/400

From Try-AS/400
Revision as of 19:21, 10 February 2020 by PoC (talk | contribs) (Addition)
Jump to navigation Jump to search

The QIC drives contained in many older machines are often defective, or it's expensive to impossible to get actual tapes for these drives. Sometimes, stock tape drives can be used also. This article documents which combination of machine, OS release, and drive has been tested so far.

Drive Server/OS Tasks tested Remark
HP DDS-1/2/3 9401-150/V4R5 Save/Restore/BMR[1] DIP-Switches set to default.
Conner CDT20004R-S 9401-150/V4R5 Save/Restore DIP-Switches set to default.
SCSI errors are logged for every initial access.
Otherwise works.
HP DLTVS 80[2] 9406-S20/V4R4 + 2726 SCSI RAID-Controller Save/Restore SCSI-Error logged at IPL time.
Otherwise works.
HP DDS-1/2/3 9402-400/V4R2 None. DIP-Switches set to default.
Drive not recognised in DST.

Footnotes

  1. ↑ Bare Metal Restore, IPL from tape and restore of the entire system.
  2. ↑ Caution! Protect the controller board of the drive with a piece of carton or other insulating material. The EMI prevention springs will scratch components from the board otherwise.
Retrieved from "http://try-as400.pocnet.net/index.php?title=Tape_Drives_on_old_AS/400&oldid=730"